ATC0078 seal swell agent is a diester which is specifically suited to industrial and automotive lubricants formulated with Group I, II, III or IV base oils. In addition ATC0078 will lower pour points and aid the solubility of more polar additives.
Features
Strong seal swell activity
Low odor
Ashless, zero chlorine
Solubility in Group I, II, III and IV base oils
Increases solubility of many additive components
Improves low temperature properties of finished lubricants
ATC1115 contains ashless dispersant, alkyl zinc dithiophosphate and metallic detergents. It provides excellent control of deposits, rust oxidation, bearing corrosion, wear and oil consumption in highly supercharged diesel engines operated in severe service.
ATC1150 is an API SF/CD DI package for use in PCMO and HDD
product lines. ATC1150 is designed for use with Group I base
stocks to formulate low-tier crankcase engine oils.
ATC1157 is a dispersant inhibitor package developed for
mainline heavy duty diesel engine oils. This package, when used
with our OCP VII, ATC1157, fully meets the API licensed
requirements of CJ-4/SN in both SAE 15W-40 and 10W-30
viscosity grades. In addition, the technology is fully approved
against a number of original equipment manufacturers (OEMs)
performance specifications in appropriate grades and base
stocks – including Caterpillar ECF-3, Cummins CES 20081, Detroit
Diesel Power Guard 93K218, Mack EO-O Premium Plus, Renault
VI RLD-3, Volvo VDS-4, and Ford WSS-W2C171-E specifications.
For specific formulation recommendations and licensing details,
please contact your US Global Petroleum representative.
ATC1145 contains ashless dispersant, zinc dithiophosphate and metallic detergents. It provides excellent control of deposits, rust oxidation, bearing corrosion, wear and oil consumption in monograde and multigrade engine oils with non-dispersant VI improvers. It is designed for use in gasoline cars built in 2011 or older.
Recommended Dosage
Recommended treat rates range from 8.3 to 9.8 wt%
ATC1145 is formulated for use with non-dispersant VI Improver.
ATC1140 is recommended at the following treat rates in suitable base stocks to formulate high-quality,non-API motor oils meeting the requirements of a variety of API service levels.
ATC1141 is recommended at the following treat rates in suitable base stocks to formulate high-quality,non-API motor oils meeting the requirements of a variety of API service levels.
ATC1149 is a new additive technology designed to meet the latest ILSAC GF-5 and API SN industry requirements as well as the performance demands of the new GM dexos™ 1* specification in cost-effective formulations. ATC1149 is designed for the manufacture of all ILSAC and non-ILSAC viscosity grades in a wide range of industry basestocks in conjunction with VI improver (50 SSI). ATC1149 already contains a pour point depressant (ppd) and so no supplemental ppd should be necessary in order to meet low temperature properties of any of these grades ATC1149 can also be used to meet both ILSAC GF-5 and dexos™ 1 in an SAE 5W-30 grade using VI improver (35 SSI) in selected basestocks to meet the more severe Noack volatility demands of the dexos™ 1 specification.
Features
Robust technology that exceeds the demands of the new ILSAC GF-5 specification
Covers both API SN and API SN Resource Conserving license requirements
Approved against GM dexos™ 1 specification with no additive modifications, boost or changes in treat rate
ATC1516 sulfonate detergent is a highly basic calcium
detergent that protects against high temperature deposits
and controls rust under low temperature operating conditions
in gasoline and diesel engine applications. ATC1516 is also used in marine oils due to its high rate of acid neutralization, water tolerance and excellent filterability. ATC1516 is suitable for use in a range of industrial lubricants and greases.
ATC1161 is a new additive technology designed to meet the
latest ILSAC GF-5 and API SN industry specifications in optimized
SAE 5W-30 & 10W-30 blends. ATC1161 is designed to be used in
conjunction with Olefin Co-polymer VI Improver (50 SSI) in
either EHC or Safety-Kleen Group II basestocks together with
Ultra S or Yubase Group III basestocks as required.
Features
Optimized treat-rate product meeting the latest ILSAC GF-5 specification in SAE 5W-30 & 10W-30 grades
Fully meets the license requirements of API SN resource conserving for these grades
